Care and maintenance
-
Care and maintenance
Why is the soap sometimes discolored when it comes out of the soap pump?
Discolorations can be caused by the pH value of the soap. Soaps with a high pH value react with the metal and allow the soap to turn brown if the pump has not been used for a while. Use a mild and pH-neutral soap instead.
-
Care and maintenance, OUTLINE LED Mirrors
The mirror arm is beginning to feel loose. Can I tighten it?
The arm of our LED mirrors can be tightened. There is a small mark in the joint, place, for example, a coin in the mark and tighten
-
Care and maintenance
How to clean a product?
Clean with a soft cloth and luke warm water, or a mild soapy solution. Do not polish.
-
Care and maintenance
What should I do if the pump head on the soap pump is stuck and it is not possible to pump?
This is usually because soap residues have dried inside the pump. Rinse the pump with warm water when changing the soap and the pump mechanism will last longer.
-
Care and maintenance
How to change the battery of the bathroom clock?
Instructions for replacing the battery can be found on the product page for YK380 and YX380.
-
Care and maintenance
Do Smedbo’s soap dispensers work for hand sanitizer ?
Yes, our soap dispensers work perfectly for both liquid soap and hand sanitizer.
-
Assembly, Care and maintenance
If I want to remove a self-adhesive product, how do I get rid of the self-adhesive 3M tape?
Use a spatula and gently lift the product from the wall. Tape residues can be ‘rubbed’ off with your finger. We recommend not placing products with 3M tape on bathroom wallpaper/wall carpet, microcement, or porous natural stone as it is difficult to know how much softener is in the material and how greasy the surface […]
-
Assembly, Care and maintenance
If I want to remove a product assembeled with the old epoxy glue, how do I get rid of the epoxy glue?
Use a spatula to lift off the product. to make it easier to get the product off, you can heat lightly with a hair dryer before using the spatula.
-
Care and maintenance, OUTLINE LED Mirrors
How to change the light in a LED?
You can not change the light in our mirrors as it is LED lighting. The lifespan of the lights are about 50,000 h so replacing the light should not be necessary.